FeiyuTech MiNi 3D Pro 3-Axis Aircraft Gimbal for GoPro

  • Feiyu Tech
  • FY-Mini3DPRO
  • 240
  • Out Of Stock
  • 239.90€
  • 239.90€

  • Ex Tax: 196.64€
- OR -

Product Highlights

  • Mounts to RC Aircraft
  • Pan, Tilt, and Roll Axis Stabilization
  • Keeps Aerial Shots Level and Stabilized
  • For GoPro HERO4, HERO3+, HERO3
  • 360° Pan Control
  • Fixed Axes and Pan/Tilt Following Modes
  • Control Outputs for RC Receiver

Compatible with GoPro HERO4, HERO3+, HERO3, and similarly-sized cameras, the Feiyu MiNi 3D Pro is a 3-axis motorized gimbal that can be mounted to a fixed wing or multi-rotor RC aircraft. It utilizes three brushless motors and a single IMU sensor to help counteract unwanted shake and camera movements along the pan, tilt, and roll axes, letting you capture smooth, stabilized FPV aerial video. Compared to the previous model, the MiNi 3D Pro offers full 360° pan control and an improved design for easier assembly and installation. A separate power supply is required.

By default, the MiNi 3D Pro works in Panning Mode, where the gimbal automatically pans to the camera follow the nose/front direction of the aircraft, while the roll axis and tilt axis remain constant. You can also select a mode where the camera tilts to follow the elevation of the aircraft or even choose to lock the camera in position along all three axes. By connecting the gimbal to an RC receiver, you can use a transmitter to switch between additional modes as well as manually control pan and tilt. Using an included cable, you can pass 5V of power to your GoPro from the same source that is used to power the gimbal. The cable also lets you simultaneously send an analog video signal from the GoPro to the gimbal, letting you output that signal to a wireless transmission system for monitoring.

Key Features
  • 3-Axis aircraft-mountable motorized gimbal
  • Compatible with GoPro HERO4/3/3+ and similarly sized cameras
  • Full 360° pan angle rotation
  • -90 to +45° tilt angle range
  • -45 to +45° roll angle range
  • Supports vertical, hanging, and forward-facing installation
  • Requires separate power supply
  • Connects to optional receiver for pan and tilt control via RC transmitter
  • Micro-USB port for firmware updates
  • Aviation-grade CNC aluminum construction
  • Updated designed for easier assembly and installation
Panning Mode
Locks tilt and roll axes; camera pans to follow the nose position, and tilt can be control by optional RC transmitter when connected to a receiver.

Panning and Tilting Mode
Locks roll axis; camera pans to follow the nose position and tilts to follow the elevation of the aircraft.

Lock Mode
Pan, tilt, and roll are all locked in position; pan and tilt can be controlled by optional RC transmitter when connected to a receiver.


Overload Current Protection 800 mA
Pan Angle 0 to 360°
Tilt Angle
-90 to +45°
Roll Angle
-45 to +45°
Panning Following Rate
Minimum: 3°/second
Maximum: 75°/second
Tilt Following Rate
Minimum: 2°/second
Maximum: 25°/second
Static Attitude Tracking Accuracy
Minimum: 0.01° Standard: 0.02° Maximum: 0.05°
Motion Attitude Tracking Accuracy
Minimum: 0.1° Standard: 0.2°Maximum: 0.5°

Working Voltage 8.4 VDC (7 to 17 VDC)
With Camera Attached: 3.6 x 2.9 x 5.1" (9.1 x 7.4 x 12.95 cm)
Top Mounting Plate: 2 x 2.9" (5 x 7.4 cm)
5.9 oz (167 g), without camera

Box Content

  • Mounting Adapter Plate
  • 6 x Damping Balls
  • 2 x Knurled Thumb Screws
  • 2 x V-Hangers
  • 4 x M2.5x5mm Hexagonal Socket Head Cap Screws
  • Micro-USB Cable
  • USB Connector
  • Video Output and Camera Charging Cable
  • Limited 1-Year Warranty
  • Write a review

    Note: HTML is not translated!
        Bad           Good